Air Conditioner Troubleshooting: What to Do Before Calling for AC Repair

October 07, 2015

The fluctuating weather in Plover can mean a variety of things, from the changing seasons to flicking off the switch of your air conditioner for the cooler months. Of course, total home comfort is your year-round goal, but sometimes our heating and cooling equipment doesn’t feel like doing that. That doesn’t mean that you’re automatically destined for AC repair though.

When your air conditioner fails to work or you notice it acting weirdly, there are a couple things you can check on before calling in the pros at Point Heating & Cooling for AC repair. Here are a few troubleshooting tips to try before giving us a shout.

1) Check your thermostat

This is one of the easiest checks that homeowners can do themselves, and may solve the issue more than they’d like to admit. Be sure your thermostat is: 

  • Set to “cool”
  • Programmed to be around room temperature
  • Using a newer battery

2) Look at the air conditioner filter

Dirty filters can cause air conditioners to act out of the ordinary, making them shut down without notice and without making a sound. Air conditioner filters have been the cause for a lot of AC repair calls in the past, but there’s no reason to pick up the phone when you can change it yourself. Not to mention that a dirty air conditioner filter decreases your system’s efficiency and harms airflow.

3) Find and inspect your air conditioner’s switches

Nearly all of the time, switches to your air conditioner are found:

  • Near the air conditioner itself and normally look like your everyday light switch.
  • At your circuit breaker panel. Identify the breaker that controls your air conditioner and determine if it is in the middle position or the Off position. If it is, cycle the breaker to Off and then switch it back to the On position.

4) Open all of your vents

A common mistake among homeowners is to close vents in vacant rooms, but this may actually lead to a need for AC repair. Closing these vents may potentially cause your system to be less efficient and turn off because of added airflow pressure.

If you’ve completed these four troubleshooting tips and still aren’t having any luck getting your system back in working order, it’s probably time to give us a shout. The pros at Point Heating & Cooling in Plover are here to be sure all of your AC repair needs are met, so give us a call at 715-504-0533 to set up an appointment with us.