Places to Check for Leaking Air Prior to Furnace Service in Your Plover Home

October 21, 2015

As you prepare for your annual furnace maintenance this year, take a moment to consider calculating the amount that you spend on heating and cooling throughout the year. Then, think about the last time you’ve taken a walk around and checked for leaky doors and windows. It’s something that practically all homes have to put up with, but there is a large portion of money going between the cracks, going out the window – literally. 

However, the majority of the cracks and leaks can be easily handled on your own, helping you save money all year. Plus, it can help you maximize the benefits of your annual furnace service too, helping you potentially retain more heat while helping to improve energy efficiency and your comfort. 

So where should you look for those irritating leaks? 

The attic.

Attics are well-known for allowing the most air out of your home, so view these particular areas while up in your attic:

  • Stud cavities around your home may be open, or uninsulated, meaning air can easily get out, leaving you with a less-than-comfortable home and significantly impacting your energy efficiency as well. If you would like to get the most out of your annual furnace service, make sure you fill these gaps to better insulate your home.
  • Recessed lights typically have vents that open in to the attic, which leaves the door open for heat loss. Make sure your lights come previously sealed or add an airtight baffle to solve the problem on unsealed lights.
  • Attic access doors normally aren’t thought of when you swap out or install weatherstripping to other windows or doors around your house but can let quite a bit of heat escape in to your attic.

All house openings.

Windows and doors are typically the chief culprits for lost heat, and rightfully so.

  • Check to be sure the weatherstripping on all of your doors is in working order and hasn’t been cracked or torn. If it is, replace it.
  • Check the perimeter of all of your home’s windows, both in and outdoor, inspecting the caulking. It’s easy to use a caulking gun to plug any holes you uncover.
  • If your home has a chimney, be sure any holes around the flue or chimney itself are properly covered with aluminum flashing to prevent air flow.

The number of ways you can get the most out of your annual furnace service dollars is awfully long, but if you take a little time to tackle the tips we’ve outlined, you can potentially make your home more efficient and more comfortable. If you have any questions about these tips or are just looking to set up furnace service, give Point Heating & Cooling a call at 715-504-0533.